• Descriptions：

1. Release force can be adjusted according to customer requirements
2. Residual adhesion force of 90% or more
3. No need for room temperature curing after coating
4. Uses a Melamine-based resin system
5. Release stability is equivalent to Dow Corning materials
6. Test by using Nitto-31B tape, and place the specimen under a load of 20 g/cm2 for 24 hours
7. Universal tensile machine (direction 180 °, speed 300mm /min) for releasing force test
8. Ultra-light release for ceramic coating (MLCC), graphene conductive coating

Hardness test substrate is 1mm glass

Hardness can be adjusted according to customer’s customization requirements

Water-based peelable plastic

To spray or make with screen printing, etc. on a variety of substrates for sheltering purpose. The film can be coated at room temperature.

Can withstand high temperature processing with no cracking, and can be easily removed without residue.

Uses water as the main solvent, which conforms even more to environmental regulations.